Electric.ie Nov Dec 2020

48 ELECTRIC.IE • The Mag azine & Website for the Iri sh Electrical Industry • De-centralised MVHR The Zero 1 is a de – centralised ductless mechanical ventilation system with heat recovery. With a heat recovery efficien- cy up to 90% and extremely low running costs of only 6 watts (€10/year) on high speed the Zero 1 is very energy efficient for new and retro-fit air tight buildings. Excellent indoor air quality is achieved as each Zero1 unit can deliver a maximum ventilation rate of 60m³/h. The Zero1 uses a brushless bi – directional motor and has 3 modes of operation, fresh air mode, ex- haust air mode and cycle mode. In the cy- cle mode, the motor switches its cycle ev- ery 60 seconds and as the stale air is being exhausted out it passes several filters and a ceramic heating core. The ceramic heat- ing core is heated up waiting for the motor to swtich to fresh air mode. The fresh air passes through the heated ceramic core and recovers up to 90% of the heat and sends it back into the room. Quick & Easy Installation When it comes to building an air-tight building, mechanical ventilation is one of the most important pieces of kit required to allow the structure to breathe. It is es- sentially the lungs of the building. Detailed planning is required to plan duct routes through web joists and attic voids back to the central fan. This is all very achievable on a completely new build dwelling when there is a blank canvas to work with. When working on an energy retro-fits or exten- sion to the property, the luxury of having exposed ceilings and routes for the duct- ing is not always there. This is where the ZERO 1 will have a greater advantage over the centralised system. The installation is very straight forward. A core hole in the lo- cation where the unit is going and a small power cable is all that is required. Installa- tion can be less than 30 minutes for each unit. Ceramic heat exchange core At the heart of the Zero1 is the ceramic core heat exchange unit. This core is protected either side by special filters that trap VOC’s on exhaust and supply mode and only al- low air to flow through. Every element in- side the Zero1 is removable for cleaning ensuring quality fresh heated air is sup- plied into the building. This feature also eliminates the requirement for expensive service professionals to carry out mainte- nance works as it can be easily done by the homeowner. It would be like cleaning out a domestic vacuum cleaner. Design- ing a ventilation system for a new home or renovation could not be easier and be in full compliance with the new building regulations and nZEB. One Zero1 unit is ca- pable of extracting 60m³/h (16.6l/s) at high speed. According to the TDG Part F 2019 regulations the minimum extract rate for a kitchen is 13l/s. Zero1 Ductless MVHR Zero1 Benefits. Simple installation, no ducts required. Ideal for new builds and energy retro-fits of buildings. Designed to work in airtight buildings. Extremely low running costs, low noise operation and remote control included. INFO@ECOVOLT.IE | +353 (0)1 524 0387 | WWW.ECOVOLT.IE De-centralised MVHR The Zero 1 is a de – centralised ductless mechanical ventilation system with heat recovery. With a heat recovery efficien- cy up to 90% and extremely low running costs of only 6 watts (€10/year) on high speed the Zero 1 is very energy efficient for new and retro-fit air tight buildings. Excellent indoor air quality is achieved as each Zero1 unit can deliver a maximum ventilation rate of 60m³/h. The Zero1 uses a brushless bi – directional motor and has 3 modes of operation, fresh air mode, ex- haust air mode and cycle mode. In the cy- cle mode, the motor switches its cycle ev- ery 60 seconds and as the stale air is being exhausted out it passes several filters and a ceramic heating core. The ceramic heat- ing core is heated up waiting for the motor to swtich to fresh air mode. The fresh air passes through the heated ceramic core and recovers up to 90% of the heat and sends it back into the room. Quick & Easy Installation When it comes to building an air-tight building, mechanical ventilation is one of the most important pieces of kit required to allow the structure to breathe. It is es- sentially the lungs of the building. Detailed planning is required to plan duct routes through web joists and attic voids back to the central fan. This is all very achievable on a completely new build dwelling when there is a blank canvas to work with. When working on an energy retro-fits or exten- sion to the property, the luxury of having exposed ceilings and routes for the duct- ing is not always there. This is where the ZERO 1 will have a greater advantage over the centralised system. The installation is very straight forward. A core hole in the lo- cation where the unit is going and a small power cable is all that is required. Installa- tion can be less than 30 minutes for each unit. Ceramic heat exchange core At the heart of the Zero1 is the ceramic core heat exchange unit. This core is protected either side by special filters that trap VOC’s on exhaust and supply mode and only al- low air to flow through. Every element in- side the Zero1 is removable for cleaning ensuring quality fresh heated air is sup- plied into the building. This feature also eliminates the requirement for expensive service professionals to carry out mainte- nance works as it can be easily done by the homeowner. It would be like cleaning out a domestic vacuum cleaner. Design- ing a ventilation system for a new home or renovation could not be easier and be in full compliance with the new building regulations and nZEB. One Zero1 unit is ca- pable of extracting 60m³/h (16.6l/s) at high speed. According to the TDG Part F 2019 regulations the minimum extract rate for a kitchen is 13l/s. ero1 Ductless MVHR Zero1 Benefits. Simple installation, no ducts required. Ideal for new builds and energy retro-fits of buildings. Designed to work in airtight buildings. Extremely low running costs, low noise operation and remote control included. INFO@ECOVOLT.IE | +353 (0)1 524 0387 | WWW.ECOVOLT.IE The 1 is a de – centralised ductless echanical il i syste with heat recovery. ith a heat recovery efficiency up to 90% and extr m ly low running costs f only 6 watts (€10/year) on hig speed ero 1 is very energy efficient for w and retro-fit air tight buildings. Excellent i ality is achieved as each r 1 unit can deliver a maximu f 60 ? h. T e Zero1 uses a brushless bi – directional motor and has 3 modes of operation, fresh air mode, exhaust ir mode and cycle mode. In the cycle mode, the motor switches its cycle every 60 seconds and as the stale air is being exhausted out it passes sev r l filters a d a ceramic h ting core. The ceramic heating core is heated up waiting for the motor to swtic to fresh air mode. The fresh air passes through the heated ceramic core and recovers up to 90% of the heat and sends it back into the room. the heart of the Zero1 is the cerami core heat exchange un t. This core is protected either side by special filters that trap VOC’s on exhaust and supply mode and only allow air to flow through. Every element inside the Zero1 is removable for cleaning ensuring quality fresh heated air is supplied nto the building. This feature also eliminates the requirement for expensive service professional to carry out maintenance works as it can be easily one by th homeo ner. It would be like cleaning out domes c vacuum cleaner. Designing a ventilation system fo new home or renovation could not be easier and be in full compliance with the new building regulations and nZEB. One Zero1 unit is capabl of extr cting 60m?/h (16.6l/s) at high speed. A cording to the TDG Part F 2019 regulations the minimum extract rate for a kitchen is 13l/s. When i comes to building an air-tight building, echanical i one of the most important pieces of kit required to allow the structure to breathe. It is essentially the lu s of the buildin . Detailed planning is requi ed to plan duct route through web joists and atti voids back to the central f n. This is all very achievable on a compl tely new build dwelling when there is a blank canvas t work with. When working on an energy retro-fits or extension to the property, the luxury of having exposed ceilings and routes for the ducting is not always there. This is wh re the ZERO 1 will have a greater advantage over the c ntralised system. The installation is very straight forward. A core hole in the location where the un t is going and a small power cable is all that is requi ed. I stallation can be less than 30 minutes for each unit. De-centralised VHR The Zero 1 is a de – centralised ductless echanical ventilation system with heat recovery. With a heat recovery effici n- cy up to 90% and extre ely low running costs of only 6 watts (€10/year) on high speed the Zero 1 is very nergy efficient for new a d retro-fit air tight buildin s. Exc llent indo r a r quality is achieved as each Zero1 unit can deliver a axi u venti ation rate of 60m³/h. The Zero1 uses a brushless bi – directional otor and has 3 odes of operation, fresh air ode, ex- haust air ode and cycle ode. In the cy- cle ode, the o or switc es its cycle v ery 60 secon s as the stale air is being exhausted out it passes sev ral filters and a cerami heating core. The c r mic h at- ing core is heated up waiting for th otor to swtich to fresh air ode. The fresh air passes through the heated cera ic core and re overs up to 90% of the heat and sends it back into the roo . Quick & Easy Installation When it co es o building an air-tight building, echanical ventilation is one of the ost i portant pieces of kit required to allow the structure to breathe. It is es- sentially the lungs of the building. Detail planning is required to plan duct routes through w b joists and attic voids back to the central fan. This is all very a hievable on a completely new build dwelling when re is a blank canva to work with. hen working on an energy retro-fits or exten- sion to the property, the luxury of having exposed ceilings and routes for the duct- ing is not always there. This is where the ZERO 1 will have greater advantage over the centralised yst . e installation is very straight forw rd. A core hole in the lo- cation where the unit is going and a s all power cable is all that is required. Installa tion can be less than 30 inutes for each unit. Cera ic heat exchange core At the heart of the Zero1 is the ceramic core heat exchange unit. This core is protected either side by special filters that trap VOC’s on exhaust and supply ode and only al- low air to flow through. Every ele ent in- sid t e Zero1 i re ovable for cleaning ensuring quali y fres heated air is sup plied into the building. This eature also li inates the require nt for expensive service professionals to carry out ainte- nance works as it can be easily done by the ho eowner. It would be like clea ing out a do estic va uu cleaner. Design- ing a ventilation syste for a new ho e r renovation ould not be easier and be full co pliance with the new building regulations and nZEB. One Zero1 unit is ca- pable of extracting 60 ³/h (16.6l/s) at high speed. According to the TDG Part F 2019 regulations the ini u extract rate for a kitchen is 13l/s. Zero1 Ductless MVHR ero1 e e ts. Si le i stallatio , o cts re ire . I eal for e il s and energy retro- ts of il i s. esi e to work in airtight buildin s. Extremely low running costs, lo oise o eratio a re ote co trol i cl e . INFO ECOVOLT.IE | +353 (0)1 524 0387 | .ECOVOLT.IE