May June 2020 Electric.ie Magazine

ELECTRIC.IE • The Magazine & Website for the Irish Electrical Industry • 51 Step 3: Downloading the ‘Wiser heat’ app To remotely operate the WISER system, download the WISER Heat app from the App Store or Google Play. The app will guide you through the rest of the installation process to connect your Room Thermostats and WISER Heat Hub with your Radiator Thermostats. Once the Room Thermostat and Radiator Thermostats have been added to the system, WISER is ready to control the heating and hot water. The app can be downloaded on additional smartphones by simply using the same login credentials. Schneider Electric Step 4: Installing the Wiser Room Thermostat The Room Thermostat can either be fixed to a wall using the included wall bracket or alternatively positioned on the table stand. The thermostat should be placed in a position out of direct sunlight or draughts and in a place where it can respond to room temperature but away from the direct influence of radiators or other appliances that might give off heat. Step 5: Installing the Radiator Thermostat The WISER Radiator Thermostat can be quickly and easily fitted onto existing radiator valves, simply by unscrewing the old TRV head and screwing on the new one. As radiator valve bodies are not all the same, WISER Radiator Thermostats come with two valve adaptors suitable for most installations. Once installed, you can calibrate the Radiator Thermostat by twisting the cap in the ‘—‘ direction for 2 seconds until the right LED shows a solid blue. Step 6: Testing the signal strength The signal strength of the Radiator Thermostats can be viewed on the ‘Rooms and Devices’ page in the app. To test the signal on the Room Thermostat simply check the signal strength icon. Two to three bars of signal is recommended to maintain communication with the Heat Hub, if there is no signal, this will be indicated by a periodically flashing red LED on the Room Thermostat. If the signal is low on either the room or radiator thermostat, a Wiser smart plug can be installed to increase signal strength and provide additional controls. Allowing installers to work wiser, not harder, Schneider Electric’s newWISER range of smart heating controls is set to offer the fastest install on the market.